Application
Couplings for mould temperature control and mould cooling
Quick-release couplings, multi couplings, temperature control hoses and collectors for temperature control and cooling of injection and die-casting moulds – matched to each other and from a single source.
Which coupling profile fits?
What matters is the profile already fitted on the machine and the mould. Couplings of different profiles do not fit together.
| Series | Profile | Typical use |
|---|---|---|
| HPT | European profile | The standard for mould temperature control in Europe – low pressure, temperature control, plastics industry, foundry. Also available as a multi coupling. |
| IPT | International profile | For machines and moulds with the international profile – also in stainless steel. |
| MPT | French profile | French standard for low pressure and all media, compatible with the MPT multi coupling. |
| RPT | flat face | Leak-free with optimised flow – no drips when disconnecting, ideal for frequent mould changes. |
| CPT | Flat face, push-pull | Leak-free and operated with one hand. |
| GPT · HHT | Full flow | Large nominal sizes for high flow rates at low pressure. |
| WHT | High temperature | For thermal oil up to 325 °C, spatter-free and shutting off on both sides. |
Which coupling do I have? – Measure the nipple and identify the profile →
All mono couplings at a glance →
Mono coupling or multi coupling?
Mono coupling
Each circuit is connected individually. Flexible, economical and the simplest solution for a few circuits.
Multi coupling
Up to twelve circuits are connected and disconnected in one move via a central lock. This shortens mould changes and prevents mixed-up connections.
With configurator, parts list and PDF – for the HPT, MPT, MXT and RPT profiles.
Temperature control hoses
- Push-on hoses MNG-P100S, MNG-P120S and MNG-P140S – mounted on push-in barbs without clamps, for water up to 140 °C.
- Water hoses MNG-TRX-100 and MNG-E140S – with hose barb and clamp, also for higher pressures.
- PTFE and PFA corrugated hoses BTH-UF and BTH-UFT – with stainless steel braid for oil, steam and chemicals up to 260 °C, heat protection available.
Collectors in brass, aluminium and stainless steel
Collectors bring supply and return from the temperature control unit to the individual circuits of the mould.
- BV brass collector – 3 to 20 outlets, more than 90 standard versions.
- AV aluminium collector – anodised, 2 to 8 outlets per face, also with a dividing web for supply and return in one bar.
- AVS pluggable aluminium collector – 4 to 16 outlets, length matching the number of outlets.
- EV stainless steel collector – also for low temperatures down to -50 °C.
Water or oil – which seal?
- Viton (FKM) is standard for HPT, IPT, MPT, RPT and CPT: water up to +160 °C, thermal oil up to +200 °C.
- EPDM is suitable for water up to +150 °C, not for mineral oils and greases.
- For thermal oil above 200 °C there is the WHT high-temperature coupling with FFKM seal up to 325 °C.
The exact values for each series are given on the respective series page.
Accessories for the temperature control circuit
Ball valves, Hose barbs, Hose clamps, Reducers and double nipples, Plugs and sealing tapes.
Project planner: equip your mould and create a complete parts list →
Planning a mould temperature control system?
Send us your requirements – number of circuits, medium, temperature and existing profile. We will put together the right couplings, hoses and collectors.